Monitoring of the ecotoxicological hazard potential by polar organic micropollutants in sewage treatment plants and surface waters using a mode-of-action based test battery

We propose and evaluate a mode-of-action based test battery of low-complexity and in-vitro bioassays that can be used as a routine monitoring tool for sewage treatment efficiency and water quality assessment. The test battery comprises five bioassays covering five different modes of toxic action. The bioluminescence inhibition test with Vibrio fischeri and a growth rate inhibition test with the green algae Pseudokirchneriella subcapitata are measures of non-specific integrative effects. A second endpoint in the algae test, the specific inhibition of the efficiency of photosynthesis, gives an account of the presence of herbicides. An enzymatic assay covers an important aspect of insecticidal activity, the inhibition of the acetylcholine esterase activity. Estrogenic effects are assessed with the yeast estrogen screen (YES) and genotoxicity with the umuC test. Three field studies, each lasting six to seven consecutive days, were undertaken at a sewage treatment plant (STP) in Switzerland. Samples were collected in summer and late autumn, under dry and rainy conditions. None of the bioassays gave positive results with raw water in whole effluent toxicity testing. Therefore, water samples from various sites during wastewater treatment and from surface water were enriched with solid-phase extraction. The focus was on non-volatile compounds of average to moderate hydrophobicity, a range that includes most pesticides, biocides and pharmaceuticals. Various polar solid phases were evaluated for their extraction efficiency, disturbance by matrix components and overall performance. We finally selected a mixture of a polymeric sorbent and a C18-sorbent, Lichrolut EN and RP-18 or, alternatively, Empore SDB-RPS disks. All bioassays gave clear and robust responses with the SPE extracts. With the bioassay data the treatment efficiency of the STP can be assessed with respect to different modes of toxic action and accordingly different groups of micropollutants. Furthermore, the data allowed for a comparison between the effluent and the receiving river. In all bioassays the primary effluent had a strong effect and this effect was reduced after passing the STP. Treatment efficiency was high (typically over 90%) but varied from bioassay to bioassay, which is expected because each bioassay detects different types of micropollutants and therefore we cannot expect a common answer.     

Toxic equivalent concentrations (TEQs) for baseline toxicity and specific modes of action as a tool to improve interpretation of ecotoxicity testing of environmental samples

The toxic equivalency concept is a widely applied method to express the toxicity of complex mixtures of compounds that act via receptor-mediated mechanisms such as induction of the arylhydrocarbon or estrogen receptors. Here we propose to extend this concept to baseline toxicity, using the bioluminescence inhibition test with Vibrio fischeri, and an integrative ecotoxicity endpoint, algal growth rate inhibition. Both bioassays were validated by comparison with literature data and quantitative structure-activity relationships (QSARs) for baseline toxicity were developed for all endpoints. The novel combined algae test, with Pseudokirchneriella subcapitata, allows for the simultaneous evaluation of specific inhibition of photosynthesis and growth rate. The contributions of specific inhibition of photosynthesis and non-specific toxicity could be differentiated by comparing the time and endpoint pattern. Photosynthesis efficiency, measured with the saturation pulse method after 2 h of incubation, served as indicator of specific inhibition of photosynthesis by photosystem II inhibitors. Diuron equivalents were defined as toxicity equivalents for this effect. The endpoint of growth rate over 24 h served to derive baseline toxicity equivalent concentrations (baseline-TEQ). By performing binary mixture experiments with reference compounds and complex environmental samples from a sewage treatment plant and a river, the TEQ concept was validated. The proposed method allows for easier interpretation and communication of effect-based water quality monitoring data and provides a basis for comparative analysis with chemical analytical monitoring.     

Population monitoring for genetic damage induced by environmental physical and chemical agents

The short-term tests performed in vitro on different systems, from phage to human cells, or in vivo, on laboratory animals, allow only a qualitative estimate of the action of mutagenic agents, and the extrapolation of such experimental results to man may encounter many difficulties.Direct biomonitoring of populations exposed to chemicals could represent a more realistic approach for an evaluation of the hazards to man. Certain methods are still under development. Nevertheless, other ones can already by used routinely, e.g. the cytogenetic observations on peripheral blood lymphocytes and the Ames test for mutagenic substances in urine, and can provide useful suggestions how to set threshold limits for chemical substances encountered in the working environment.     

中国环境镉接触人群低骨密度及肾功能不全的研究

25年前,Ambio曾载文提出应警惕环境镉污染引起的健康效应.1998年在中国进行了这方面的研究,评价了因食用大米而接触镉人群的前臂骨密度(BMD)和肾功能,发现尿镉(CdU)或血镉(CdB)高的绝经后妇女及血镉(CdB)高的男性,BMD均有所下降.在CdB或CdU与肾功能不全(视黄醇结合蛋白排泄增加)之间也发现了明显的、有统计学意义的剂量-效应关系及剂量-反应关系.第一次报道了日本以外的亚洲地区镉接触人群中存在骨不良效应.本文的意义在于阐明了亚洲的环境镉接触人群中仍存在着与肾和骨(镉的比较严重的有害效应)的联合效应,也讨论了一些欧洲镉接触人群的骨效应.     

Past and future sustainability of water policies in Europe

The article contributes to a discussion on two global issues on water: water resources management, and water supply and sanitation. Focusing on Europe, it traces the legal roots of current systems in history: as a resource, water is considered as a common property, rather than a market good; while as a public service it is usually a commodity. Public water supply and sanitation technologies and engineering have developed under three main paradigms: quantitative and civil engineering; qualitative and chemical/sanitary engineering (both on the supply side); and the most recent one, environmental engineering and integrated management (on the demand side). The cost of public drinking water is due to rise sharply in view of the two‐fold financial challenge of replacing an ageing infrastructure and keeping up with ever‐rising environmental and sanitary quality standards. Who will pay? Government subsidies, or water users? The author suggests that apparent successes with privatisation may have relied heavily on hidden government subsidies and/or the healthy state of previously installed water infrastructure: past government subsidies are still felt for as long as the lifetime of the infrastructure. The article stresses the importance of public participation and decentralized local management of water and sanitation services. Informing and involving users in water management decisions is seen as an integral part of the ‘ethics’ side of the crucial three E's (economics, environment, ethics). The article strongly argues for municipal provision of water services, and hopes that lessons learnt and solutions found in the European experience may serve water services management efforts in other regions of the world.     

Job level risk assessment using task level strain index scores: a pilot study.

This paper explores 2 methods of modifying the Strain Index (SI) to assess the ergonomic risk of multi-task jobs. Twenty-eight automotive jobs (15 cases and 13 controls) were studied. The first method is based on the maximum task SI score, and the second method is modeled on the NIOSH Composite Lifting Index (CLI) algorithm, named cumulative assessment of risk to the distal upper extremity (CARD). Significant odds ratios of 11 (CI 1.7-69) and 24 (CI 2.4-240) were obtained using the modified maximum task and CARD, respectively. This indicates that modification of the SI may be useful in determining the risk of distal upper extremity injury associated with a multi-task job.     

Investigating soils retention ratios and modelling geochemical factors affecting heavy metals retention in soils in a tropical urban watershed

This study aimed at investigating the retention of Pb and Cd in soils and the geochemical factors influencing the adsorption of these pollutants. Soil samples were air-dried and ground to pass through a 2-mm sieve, and different soil extracts were prepared for chemical analysis (organic matter, cation exchange capacity and pH). Total Pb and Cd were extracted with diacid using digestion method and determined by atomic adsorption spectrophotometer (AAS) after filtration. Results revealed that the heavy metals retention ratio (RR) of the Rhodic ferralsol, Xanthic ferralsol and Mollic gleysol (2) were very high for Cd (>80 %) and was relatively low (generally < 60 %) for Pb. In contrast, RRs for the Plinthic gleysol and the Mollic gleysol (1) were relatively low (<60 %), regardless of the heavy metal concerned. Multiple regression equations indicated for Pb and Cd concentrations different linear relationships over simple linear regression, when pH, organic matter, clay percentage and cation exchange capacity (CEC) were used as independent variables. Results indicate that organic matter exerts major influences on the retention of Pb and Cd in soils, while CEC, clay content and pH have a minor influence in this process in the Ntem watershed. From these observations, the application of soil organic matter could be a solution in protecting shallow aquifers from heavy metal pollution and thus insuring that they are not a hazard to public health.